-
Finished off all the machine sewing on the hood; zipper install and edge finish. I am never prepared for how many pins a simple task inevitably needs!
-
This paint job looks much better than previous, more alive. These are the completed antlers for the jackalope project.
-
Whelp, the original gore cap was too large and failed in holding the tails weight up. So I’m redesigning with a single reinforced belt ‘tube’ and I inserted a 3” foam block at the tail base for stability. So far, it looks like it’ll work well.
-
All internal issues are now resolved! Notably, chin extended & rest completely replaced with one from TwinBlueChimera sans built up padding. Brow ridges were also reduced as once fur was added my vision was impeded. Problems with crest mechanism resolved allowing for smooth, even movement.
-
I’ve been experimenting with eye mesh and discovered an easy way to get clear vision without the mesh being visible externally. Sheer fabric is great for creating a seamless look from the outside, but if your vision ports are small, double layers pet mesh in a cross hatch gives you far superior vision as your…
-
The hinges remained too bendy despite reforming. A big thanks to @TwinBlueChimera who suggested to expose them to sunlight to harden them further as they are a photopolymer resin. Three 2 hour exposures to indirect sunlight and they are now noticeably stiffer and able to support the base mask, as well as mask+antlers, when resting…
-
Jackalope update! Major hardware is now all installed. Chin has been extended to compensate for glasses pushing the mask out from the face. Gums, lips, and antler bases are apoxie sculpted. Eyes drilled out. Antlers are removable for storage. Jawset by DrakonicKnight. Base by StuffedPanda. Antlers by DVC. Flexible hinges, forehead rest, head harness by…
-
More work on the feetsies. Skin details are done using puffy paint; this is glow in the dark which dries clear as you can see from the sections I did first. The bottle says dries in 24 hours, but some of these blobs are super thick and I’m guessing will need at least a week…